Meaning
Imaging sensor density specifies the number of discrete sampling points across a two-dimensional sensor array within an inspection system. Total area scan resolution determines the smallest defect size identifiable during the automated optical inspection of printed circuit board assemblies. The resolution depends on the optical magnification and the physical pixel pitch of the charge coupled device.
Sensor Density
Spatial frequency response defines the limit of detail captured by the hardware. Effective area scan resolution decreases when the lens system introduces spherical aberration or when the illumination wavelength causes diffraction. High pixel counts do not ensure clarity if the light path is obstructed.
Inspection Throughput
Inspection throughput varies inversely with the level of detail required for a specific board area. While area scan resolution increases to detect hairline solder bridges, the processing time per frame grows as the square of the linear pixel count. A typical five micron setting suffices for standard passive components.
Higher settings require the system to capture more images to cover the same physical surface, which slows the conveyor and reduces the total output of the factory line.
Calibration Requirement
Quality control documentation specifies the minimum sampling rate for critical solder joints. Each area scan resolution setting requires a dedicated calibration against a standard glass reticle. Calibration ensures that measurements remain consistent across different production lines.