Meaning
Spring-loaded contact assembly designed for high-frequency signal transmission within a shielded environment. The coaxial pogo pin provides a path for radio frequency signals between a test fixture and a device under test while maintaining impedance matching. It consists of a center conductor and an outer shielding tube separated by a dielectric material.
This structure ensures that electromagnetic interference does not degrade the signal during automated testing cycles.
Mechanical Structure
Contact forces drive the internal plunger to establish a reliable electrical connection against flat or recessed pads. Since a coaxial pogo pin incorporates both signal and ground paths in one unit, it requires precise alignment during the mounting process. The outer shell usually connects to the ground plane of the test board.
Durable materials like gold-plated copper alloys prevent oxidation over thousands of compression cycles to maintain low contact resistance.
Signal Performance
Impedance control is the primary metric for evaluating these components in a production environment. Most coaxial pogo pin designs target a standard fifty-ohm environment to minimize reflections. Signal integrity depends on the consistency of the dielectric spacing throughout the travel of the spring.
Poorly matched pins cause insertion loss that masks the true performance of the wireless module being tested.
Mounting Environment
Designers specify these probes when board-to-board connectors are impractical for high-volume verification. A coaxial pogo pin allows for a solderless interface that facilitates rapid swap-out of test boards. Space constraints on dense enclosures often dictate the diameter of the probe body.
Total height at full compression determines the clearance required in the test jig.