Meaning
Composite protective fixturing designed for electronics manufacturing secures printed circuit boards during mechanical processing without risking static accumulation. When assembling sensitive radio modules, utilizing an esd-safe g10 plate ensures that localized electrical charges dissipate across the surface rather than striking sensitive semiconductors. This prevents latent damage in integrated RF circuits during panel routing or component placement.
Material Composition
High-pressure fiberglass laminate incorporates conductive additives to achieve a controlled surface resistivity. Standard g10 substrates consist of continuous filament glass cloth impregnated with epoxy resin. In the esd-safe g10 plate, a carbon-doped surface layer or integrated carbon matrix reduces the resistance from an insulating gigaohm level to a dissipative megaohm band.
This controlled decay prevents rapid sparks while blocking raw current loops.
Manufacturing Application
Automated carrier blocks utilize these machined substrates for raw physical stability. In these assemblies, the esd-safe g10 plate holds the device under test firmly. This prevents alignment shifts.
Performance Threshold
The material must operate within a specific resistance window of ten to the power of six to ten to the power of nine ohms per square. Measurement occurs through surface resistance meters during incoming quality control of incoming tooling. If the esd-safe g10 plate exhibits resistance below this range, it acts as a conductor and creates short circuit hazards during active module testing.
Exceeding the range leads to static buildup.