Meaning
Sinusoidal voltage or current distortions occurring at integer multiples of a fundamental operating frequency affect signal integrity and power quality in electronic systems. Engineers measure harmonics in wireless transmitters to ensure unwanted emissions do not violate band edge spectral masks or interfere with adjacent communication channels. Dynamic non-linear loads such as switching power supplies and power amplifiers generate harmonic energy during normal operation.
The scope spans RF power amplifier output stages and AC power distribution circuits, ending at the attenuation threshold of system output filtering.
Frequency Multiples
Integer multiplication of base frequencies creates secondary spectral peaks at twice or three times the operating frequency. Second and third harmonic orders carry the highest power density and require aggressive target attenuation in RF transmitter design. Non-linear semiconductor junction switching generates continuous harmonic series across output spectra.
Spectrum analyzer measurements verify that discrete harmonic spurs remain below maximum permissible emission thresholds.
Filter Suppression
Passive low-pass LC networks and tuned notch filters attenuate high-order harmonic frequencies before signal transmission. Effective suppression preserves battery life and reduces spurious radiated power.
Spectral Boundary
Emission compliance standards define absolute power ceilings for spurious harmonic signals across radiated and conducted domains. Radiated harmonic energy escaping host device enclosures can cause adjacent channel interference and trigger regulatory rejection during certification testing. System compliance requires harmonic suppression levels to exceed sixty decibels below fundamental carrier power across all operational temperature ranges.
Unfiltered harmonic distortion degrades receiver sensitivity within co-located radio receivers.