Meaning
Sharp and localized increases in signal attenuation at specific frequencies within an operating band represent a failure of the signal transmission medium. These insertion loss spikes often occur when parasitic resonances or cavity modes are excited within the circuit board or the module housing. Identifying the source of these localized losses is necessary to prevent the loss of communication channels in narrow frequency ranges.
Resonant Source
Unintended cavity resonances arise when the dimensions of the metal shield or the substrate thickness coincide with a fraction of the wavelength of the signal. The shielding enclosure behaves like a resonant chamber that drains energy away from the transmission line. Adding microwave absorbers or modifying the shield dimensions resolves the issue.
Board Integration
Ground via spacing along the high-frequency transmission line must be close enough to suppress parallel-plate waveguide modes in multi-layer structures. If the vias are spaced too far apart, the electromagnetic energy leaks into the dielectric substrate and creates sharp absorption notches at specific frequencies. High-speed circuit layouts use continuous ground walls along the trace boundaries to shield the signal path and prevent energy from coupling into adjacent cavities.
Testing Protocol
Swept-frequency measurements across the entire band are required to detect narrow attenuation peaks that single-point testing misses. Utilizing high-resolution vector network analyzers ensures that these drop-offs are captured. Boards showing such anomalies are rejected.