Meaning
Signal power attenuation occurring at the boundary between two dissimilar material layers due to electromagnetic reflection, localized scattering, or dielectric polarization mismatch. High-speed RF circuit designers analyze interfacial loss when bonding copper foils to fluoropolymer dielectric substrates in multi-layer printed circuit boards. Chemical treatment layers applied to promote adhesion often exhibit higher dielectric loss tangents than the surrounding bulk substrate.
The metric applies specifically to layered structural interfaces, excluding attenuation caused by bulk dielectric absorption within uniform materials.
Boundary Reflection
Impedance discontinuities arise when electromagnetic waves encounter micro-roughness or adhesion-promoting oxide layers at conductive boundaries. Chemical residues trapped during lamination increase interfacial loss through localized dielectric polarization mechanisms. Electromagnetic field concentrations at rough boundaries convert high-frequency signal energy into thermal dissipation.
Lamination Degradation
Multi-layer board fabrication uses thin bonding sheets known as prepreg to join core laminate substrates. High-speed digital signals traveling along strip line traces experience interfacial loss when resin flow variations alter boundary dielectric properties. Variations in epoxy resin flow near the copper surface alter local permittivity across circuit board panels.
Substrate Attenuation
Vector network analyzers measure total transmission loss across stripline test structures during laboratory evaluation. De-embedding techniques separate bulk substrate dissipation from interfacial loss components.