Meaning
Specialized laminate formulations fabricated from modified epoxy resins provide thermal stability and low dielectric loss for complex multilayer printed circuit boards. System integrators select Isola FR408HR to achieve tight impedance control and maintain structural integrity during lead-free soldering cycles. The material specification governs glass transition temperature, dielectric constant, dissipation factor and z-axis thermal expansion in circuit board substrates.
It applies to core and prepreg layers within rigid printed circuit board stackups, terminating where flexible circuit extensions or ceramic substrates are joined to the main board assembly.
Thermal Stability
Standard FR-4 materials suffer from increasing dielectric loss and thermal degradation when exposed to frequencies above two gigahertz. With a glass transition temperature of one hundred ninety degrees Celsius, Isola FR408HR maintains a stable dielectric constant across broad temperature and frequency ranges. This stability prevents trace impedance shifts that cause timing jitter in multi-gigabit backplanes.
Lamination Pressure
Multi-layer board fabrication requires precise press cycles to cure prepreg layers without inducing substrate warp or layer registration errors. Board fabricators adjust resin flow parameters during lamination to accommodate the elevated curing temperatures required by high-Tg epoxy systems. Proper processing prevents micro-delamination and conductive anodic filament growth in dense via fields.
Frequency Limit
Microwave designs operating above twenty gigahertz typically require PTFE or hydrocarbon ceramic materials with lower dissipation factors. Beyond these millimeter-wave frequencies, the attenuation characteristics of Isola FR408HR exceed acceptable insertion loss budgets, requiring a transition to specialized high-frequency substrates.