Meaning
Specialized microwave materials designed to reduce electromagnetic reflections without generating passive intermodulation products. Application of low-pim absorbers into test chambers or antenna housings prevents the generation of interference that could mask small signals.
Material Composition
Traditional carbon loaded materials often contain impurities that create nonlinear junctions in high power environments. By contrast, low-pim absorbers use high purity dielectrics and controlled conductivity to maintain linearity under stress. These materials must maintain their properties even when exposed to high thermal loads from nearby transmitters.
System Performance
The reduction of reflected energy ensures that the transmitted signal does not bounce back into the feed horn or colocated antennas. When using low-pim absorbers, the noise floor of the testing environment remains low enough to measure the inherent intermodulation of the device under test. This capability is necessary for characterizing fifth generation base station components where signal integrity requirements are stringent.
Proper placement of these materials eliminates ghost signals that would otherwise require complex software filtering to remove. Mechanical mounting solutions must avoid using metallic fasteners that could themselves become sources of intermodulation.
Deployment Environment
Anechoic chambers used for sensitive radio frequency measurements rely on these materials to simulate free space conditions accurately. Verification involves measuring the residual intermodulation of the chamber before placing any equipment inside.