Meaning
Electrical measurements taken during the various operational states of a cellular module form a detailed consumption map for the device. This lte-m current profile identifies the specific amperage drawn during sleep and data transmission cycles. Designers use this data to calculate the expected battery life of a remote asset tracker or sensor.
Operational State
Different radio activities create distinct peaks and valleys in the energy usage graph. The lte-m current profile shows that the highest consumption occurs during the uplink phase when the modem transmits data to the cell tower. In contrast, the power saving mode shows a nearly flat line at the microampere level.
Energy Budgeting
Hardware designers use these profiles to size the battery and select appropriate power management integrated circuits. A detailed lte-m current profile allows for the simulation of yearly energy usage based on how often the device wakes up to report data. This data helps in identifying firmware bugs that keep the radio active longer than necessary.
Transmission Efficiency
Variations in signal strength and network congestion directly alter the shape of the power curve. A lte-m current profile recorded in a basement with poor coverage will show much higher peaks than one recorded near a base station because the module must increase its output power and repeat packets to ensure successful delivery. Energy costs rise.
Accurate profiling includes tests under various network conditions to capture the full range of possible behaviors.