Meaning
The absorption of water molecules through microscopic fractures in the circuit board substrate or component packaging leads to degradation of high-frequency electrical performance. Under operational stress, micro crack moisture ingress creates pathways for water to penetrate deep into the dielectric matrix where the signal field is most intense. Because water has a very high dielectric constant and dissipation factor, even tiny amounts of absorbed moisture can alter the trace impedance.
Failure Mechanism
Mechanical stresses from thermal cycling cause differences in expansion between the resin and the glass reinforcement. These stresses create micro-cracks at the resin-glass boundary which act as capillary channels. Ambient humidity is then drawn deep into the board layers.
Electrical Degradation
Dielectric losses increase rapidly as moisture fills the micro-cracks along the signal path. The water molecules absorb radio frequency energy and convert this energy into heat, causing insertion loss to rise. In addition, the increased local dielectric constant detunes the filters and transmission lines, degrading the return loss of the assembly.
Reliability Assessment
Accelerated environmental testing is employed to evaluate the resistance of the finished assembly to this failure mode. The modules are subjected to high humidity and temperature cycles in a test chamber while their electrical transmission properties are continuously monitored. Passing this rigorous environmental qualification confirms that the combination of protective coatings and housing gaskets provides adequate protection against the elements over the expected product life.