Meaning
Storing lithium batteries over long periods results in electrochemical thresholds where an insulating layer forms on the anode surface. The passivation voltage is a characteristic of cells that use liquid electrolytes, such as lithium thionyl chloride. This layer protects the cell from self-discharge but also increases internal resistance.
When a device attempts to draw current, the voltage may drop momentarily below the operating limit.
Accumulation Process
Storage time and temperature accelerate the growth of this chemical barrier. A high passivation voltage indicates a thick layer that will impede the initial flow of ions. This effect is most pronounced after several months of inactivity.
Depassivation Sequence
Applying a load to the battery gradually breaks down the insulating crystals. The passivation voltage recovers to the nominal working voltage as the internal resistance falls. Manufacturers often suggest a specific pre-discharge routine to clear this layer before a device begins its primary mission.
Circuit Design
Power management units must be programmed to handle the temporary dip in supply. If the passivation voltage falls too low, the microprocessor might trigger a reset. Adding a large capacitor in parallel with the battery provides the necessary current for the startup pulse while the chemistry stabilizes.
This hardware buffer prevents premature failure of the system during the first transmission attempt.