Meaning
Systematic measurement routines performed to quantify the signal attenuation across cables and free space between a transmitter and a receiver ensure accurate power readings. A path loss calibration generates a matrix of correction factors that are applied to the raw signal during compliance testing. This correction compensates for the hardware losses inherent in the test setup.
It ensures that the measured field strength corresponds to the actual radiation from the device under test rather than system-induced decay. Its boundaries are defined by the physical connections and the specific frequency range of the test system.
System Compensation
Applying these correction factors during active testing allows the software to display the true output power of the module. Without path loss calibration, the reported signal strengths would be lower than the actual emissions of the device. This mismatch could lead to unnecessary hardware redesigns.
Measurement Procedure
Signal generators and power sensors are connected to both ends of the cable harness to measure the transmission loss directly. The path loss calibration runs across a discrete set of frequencies to build an attenuation profile. This profile is saved as a reference file for the automated test executive.
Frequency Interpolation
Linear estimation fills the gaps between measured frequency points during high-resolution scans. When the path loss calibration is executed with sufficient density, it ensures that the interpolated values remain within acceptable tolerance limits. This preserves measurement accuracy across the band.