Meaning
Fabrication process for the insulating plate that holds the test probes in an automated fixture. Probe plate drilling creates the precise holes required to seat the pogo pins used for electrical contact with a circuit board. This step converts the digital coordinates from the layout file into a physical component of the test environment.
Material Choice
High strength plastics like G10 or FR4 provide the stability and insulation needed for the probe bed. Proper probe plate drilling ensures that the holes are perpendicular to the surface and sized correctly to hold the pin sockets with a press fit. Any tilt in the hole can cause a pin to miss the intended pad on the unit under test.
Precision Requirement
Computer numerical control machines execute the pattern to meet tolerances often tighter than fifty micrometers. While probe plate drilling is a mechanical task, it directly impacts the electrical reliability of the station. If the spacing between holes is incorrect, the pins may collide or fail to make contact with small surface mount features.
Assembly Maintenance
Worn drill bits can create burrs that prevent the probes from moving freely within their sockets. Routine inspection of the results from probe plate drilling identifies when the fabrication process needs adjustment. A poorly drilled plate often requires a full replacement because the locations of the holes are fixed and cannot be easily moved once the material is removed.
Verification of hole diameter ensures that the pogo pin sockets do not vibrate loose during high volume testing.