Meaning
Velocity gradient established across the flow channel of a mold feeding system determines the mechanical deformation of the polymer melt. This value, known as runner shear rate, reflects how quickly layers of molten polymer slide past each other. High values cause shear-thinning behavior, reducing the pressure required to fill the mold cavity.
Viscosity Control
Thermoplastic viscosity varies with the speed of flow through the runner channels. By maintaining the runner shear rate within specific bounds, processing engineers keep melt viscosity stable. This stability is needed to maintain consistent part weight and dimensions across manufacturing runs.
Tool Design
Sizing the runner system requires balancing pressure drops against material volume waste. If the runner shear rate is designed too low, the polymer cool down rate increases, causing the material to freeze prematurely. This freeze-off blocks the flow of material into the cavity.
An overly wide channel increases scrap volume and extends the cooling cycle, which reduces manufacturing throughput.
Processing Limit
Extreme flow rates risk breaking down the polymer chains. Exceeding the maximum recommended runner shear rate results in degradation of the resin, leaving the plastic parts brittle. These weakened parts fail to protect electronic assemblies from mechanical impacts.