Meaning
Intermediate substrate made of crystalline silicon provides a high density routing layer between the circuit board and multiple chips. Utilization of silicon interposer allows for the integration of memory and logic dies into a single high performance module. Through-silicon vias carry signals from the top surface to the bottom side.
Bridges of this design match the fine features of the silicon to the coarser features of the package.
Routing Architecture
Distribution of signals across the surface happens using standard semiconductor fabrication processes. Because the silicon interposer is made of the same material as the dies, it shares the same thermal expansion coefficient. This matching reduces the stress on the solder bumps during temperature changes.
Designers can place chips very close together to minimize latency. Advanced lithography enables sub-micron trace widths for the highest possible bandwidth. The resulting assembly provides the performance of a monolithic chip with the flexibility of a multi-chip module.
Via Fabrication
Creation of the vertical paths involves etching deep holes and filling them with conductive metal. While the silicon interposer provides superior electrical performance, the cost of manufacturing the vias is higher than traditional organic substrates. Thinning the wafer is necessary to expose the metal at the bottom.
Thermal Path
Dissipation of heat occurs efficiently through the bulk of the material. Cooling solutions are often attached directly to the back of the silicon interposer to manage the energy from multiple chips. Reliability is improved by the uniform temperature distribution across the entire module.