Meaning
The concentration of alternating current flow near the surface of a conductor at high frequencies increases the effective electrical resistance of the transmission line. In millimeter-wave design, skin depth effects restrict the signal current to a thin outer layer of the copper trace, making the surface roughness of the metal a dominant factor in signal attenuation. Minimizing these losses is necessary to preserving signal strength in compact layouts.
Conductor Resistance
At thirty gigahertz, the current flows within a surface layer that is less than one micrometer deep. This reduces the effective cross-sectional area of the conductor, raising the attenuation per unit length. The resulting losses generate heat.
Roughness Impact
When the skin depth is comparable to the surface roughness of the copper foil, the signal current must travel along the profile of the peaks and valleys. This longer travel path increases both the resistive losses and the phase delay of the signal. Standard copper foils with high profile roughness degrade the performance of high-frequency traces.
Optimization Strategy
Selecting very low profile copper foils and optimizing the chemical adhesion treatment at the trace-dielectric interface helps reduce attenuation in high-frequency circuits. Trace geometries are designed to be wider where space permits to lower the current density and minimize resistive loss. These layout choices balance the electrical performance of the transmission lines against the mechanical peel strength required to prevent the copper traces from lifting during the assembly process.