Meaning
Automated test equipment relies on precise electrical measurements to verify the functionality of printed circuit boards. The procedure for system dmm calibration adjusts the internal offsets and gains of a digital multimeter to bring its readings back into tolerance. This maintenance ensures that production tests remain accurate over time.
Reference Standard
Calibration routines compare the instrument under test against highly stable laboratory references. During system dmm calibration, automated calibrators apply precise voltages, currents and resistances to the multimeter. These reference inputs must have an uncertainty that is several times lower than that of the instrument being tested.
Traceability Record
Metrology standards require a documented path from the factory floor measurements to national institutes of standards. Performing a system dmm calibration generates a certificate containing before and after data for each measurement range. This paper trail is necessary to prove to clients and quality auditors that all measurements are legally and technically defensible.
Measurement Guardband
Accounting for measurement uncertainty prevents the acceptance of non-compliant devices. Integrating the results of a system dmm calibration allows the software to adjust test limits, implementing a guardband to block border-line units. This reduces the risk of shipping a defective product due to small, unavoidable measurement errors in the test system.
Consequently, the calibration data directly influences the yield and quality of the assembly line.