Meaning
Calibration techniques used in vector network analyzer measurements remove systematic errors introduced by test fixtures and cables. The thru reflect line method utilizes three distinct standards to characterize and mathematically isolate the error contribution of the fixture. This approach is effective for on-wafer and printed circuit board measurements where traditional coaxial calibration standards cannot be connected.
It allows engineers to measure the true performance of high-frequency components embedded within a complex assembly.
Calibration Standard
Fixture design must incorporate specific trace geometries that represent the three calibration states. Implementing the thru reflect line sequence requires a zero-length connection, a high-reflection termination, and a line of known electrical length. These standards are printed directly on the substrate to ensure they match the physical characteristics of the device under test.
Error Correction
Parasitic inductance and capacitance from test probes can distort high-frequency measurements. Applying the thru reflect line algorithm enables the analyzer to subtract these parasitic effects from the raw measurement data. This subtraction provides a highly accurate representation of the scattering parameters of the device.
Frequency Coverage
The physical length of the line standard determines the frequency range over which the calibration remains valid. In high-speed communication systems, a single line might not cover the entire bandwidth, requiring multiple thru reflect line configurations. This multi-line approach extends the calibrated bandwidth to cover both low-frequency and high-frequency bands.