Meaning
Modification of the trace widths in design files before chemical etching accounts for the lateral removal of copper beneath the protective dry film mask. This preprocessing adjustment, known as trace undercut compensation, ensures that the finished trace matches the target dimensions specified in the layout. Without this adjustment, trace widths would be narrower than intended, leading to elevated trace impedance and reduced current capacity.
It is applied globally by the board fabricator during the computer aided manufacturing stage.
Dimension Adjustment
Acid sprays used in etching lines do not only dissolve copper downward. They also dissolve copper sideways under the edge of the etch resist, which necessitates the use of trace undercut compensation to restore the target width. Fabricators add a specific offset to the trace widths on the photolithographic artwork based on copper weight and foil type.
This offset ensures that the trace shrinks to the correct size during the etching step.
Impedance Preservation
High speed signal traces must maintain a constant characteristic impedance to avoid signal reflection. If the copper is etched away without trace undercut compensation, the resulting narrower trace increases transmission line impedance. This impedance shift causes signal attenuation and degrades the integrity of the data channel.
Proper compensation maintains the design impedance and ensures reliable transceiver performance.
CAM Implementation
Computer aided manufacturing software automatically modifies the trace widths on the manufacturing film. This step is completed before generating exposure patterns.