Meaning
Automated test setup integration relies on a unified software layer to communicate with laboratory instruments from different manufacturers. Known as VISA instrumentation, this interface system defines a standard programming interface to control oscilloscopes, multimeters, and signal generators. Programmers can write scripts that send commands over GPIB, USB, or Ethernet cables without changing the application code.
Standardized libraries simplify the creation of automated test routines for high-speed hardware validation.
Protocol Standardization
Industry-standard interface layers use a common command structure to interact with different physical instruments. The architecture of VISA instrumentation translates generic read and write commands into the specific transport protocols used by the hardware interface. This translation allows a test script to send standard SCPI commands to configure a power supply regardless of how it is connected.
This design minimizes the complexity of test software and reduces development time.
System Integration
Combining multiple test instruments into a single automated bench requires a reliable communication manager. Utilizing VISA instrumentation allows engineers to build complex test sequences that coordinate the operation of several devices at once. For example, a script can trigger a signal generator to send a test waveform and then read the output from a digital oscilloscope.
This coordination is essential for running complex characterization tests on completed circuit boards. It allows engineers to build highly scalable test systems that can be updated with new hardware with minimal code changes.
Device Configuration
Resource identifiers are used to target and control specific hardware connected to the test computer. The VISA instrumentation library uses unique resource strings to locate and configure each device on the test bench. These strings specify the physical interface type, port number, and address of the instrument.