Meaning
Specialized mechanical jigs, fixtures, mandrels, and molds establish the precise geometric envelope required to form and assemble aircraft structural components during composite curing or metallic joining. Production programs rely on airframe tooling to maintain tight tolerances across large composite skins and internal ribs. The boundary of this equipment stops at the physical mold surface and locating pin interface, excluding the processing autoclave or mechanical press that applies external force.
Dimensional Mold
Master models ground from invar or composite stock define the net shape of stiffened panels and wing spars. High dimensional accuracy prevents structural mismatch during final assembly of fuselage sections. Thermal expansion matching between the mold material and carbon fiber laminates eliminates springback errors during elevated temperature processing cycles.
Structural frames supporting the mold face must resist sagging under heavy thermal mass.
Thermal Expansion
Coefficient matching determines whether cured laminates match target design geometry without residual stress build up. Nickel-iron alloys maintain consistent dimensions through heat cycles up to three hundred degrees Celsius. Carbon composite tooling matched to laminate layups reduces CTE mismatch during cooling.
Aluminum fixtures remain restricted to low temperature bonding applications due to high thermal growth.
Handover Protocol
Qualification acceptance requires laser tracker verification against master computer-aided design surfaces prior to production release. Final buyoff documentation confirms surface profile compliance across full operating temperature ranges.