Meaning
Standardized measurement of metallic coating thicknesses ensures consistent electrical contact resistance and corrosion protection in high-reliability printed circuit board fabrication. The method outlined in astm b568 utilizes x-ray spectrometry to measure the thickness of electrodeposited and chemically deposited metallic coatings without destroying the sample. This non-destructive protocol provides a quick way to verify that protective nickel or gold layers on contact pads meet the target specifications.
It defines the boundary where mechanical probes fail due to surface fragility or sub-micron thicknesses.
Excitation Process
X-ray fluorescence generates characteristic secondary radiation when a primary x-ray beam strikes the coated substrate. Under the guidance of astm b568, the resulting energy spectrum is captured by a detector to calculate the mass per unit area. This value translates directly to physical thickness when the density of the coating material is known.
The technique relies on comparing these counts against reference standards of similar composition.
Calibration Protocol
Reference standards of certified thickness must bracket the expected measurement range of the production samples. In astm b568 testing, calibration is sensitive to substrate composition and alloy transitions. These variations demand separate calibration curves for different material pairings.
Well-calibrated instruments ensure consistent readings.
Thickness Boundary
The spatial resolution and depth penetration of the instrument limit the maximum measurable thickness. With astm b568, the effective depth decreases as the atomic number of the coating element increases. This phenomenon prevents accurate measurement of thick multilayer coatings on complex geometries.
Handover documents for high-frequency assemblies must specify the measurement spot size to validate the readings.