Meaning
De-embedding software algorithms executed within vector network analyzers isolate and extract the electrical characteristics of test fixtures from raw device measurements. Automatic fixture removal utilizes time-domain reflectometry and matrix mathematics to calculate S-parameters for the launch structures connected to a device under test. The software accepts measurement data from a physical coupon and computes a two-port S-parameter model representing the fixture half.
Applying the inverse of this fixture matrix to total system measurements yields the isolated S-parameters of the component itself.
Mathematical Extraction
Converting frequency-domain measurements into time-domain responses enables precise gating of structural discontinuities. Automatic fixture removal evaluates signal reflections along the calibration path to locate the precise impedance transition where the fixture connects to the component. Time gating removes unwanted reflections from distant connectors while preserving the phase and magnitude information of the primary transmission channel.
Matrix inversion then subtracts the fixture response from the overall system response. This digital processing removes the requirement for complex, custom physical calibration standards.
Coupon Requirement
Physical test coupons must replicate the board stackup and trace geometry of the actual product interface. Using automatic fixture removal on a mismatched substrate generates phase shifts and false attenuation figures. The coupon design determines the exact reference plane placement for final measurement outputs.
Bandwidth Limit
High-frequency dispersion in printed circuit board dielectrics constrains algorithm accuracy at millimeter-wave frequencies. Non-linear phase shifts across wide frequency spans can cause minor mathematical artifacts near the upper measurement boundary.