Meaning
Plated connection holes that start on an outer layer of a printed circuit board and terminate at an inner layer. These pathways, known as blind vias, connect surface-mounted components directly to internal circuit planes without penetrating the entire thickness of the board. Leaving the remaining layers intact below the termination point increases the available space for routing on those lower levels.
High-density interconnect boards depend on this technique to shrink the physical footprint of electronic modules.
Fabrication Method
Production of these connections relies on laser ablation or controlled-depth mechanical drilling during sequential board lamination cycles. The drill must terminate precisely on an internal copper pad, requiring high registration accuracy across all board layers to ensure electrical contact without risk of short circuits. If the registration or drilling depth drifts from nominal tolerances, the circuit fails during electrical testing.
Designers verify this alignment through x-ray inspection after the sequential lamination process is complete.
Thermal Capacity
Heat dissipation in modern high-density hardware uses the copper structure of these connections to move thermal energy away from surface components. Because blind vias provide a shorter path to internal ground planes than standard through-holes, they exhibit lower thermal resistance. Placing them directly beneath heat-generating components allows rapid heat transfer.
Manufacturing Penalty
Sequential lamination steps and specialized drilling raise the production cost of boards containing these features. Consequently, manufacturers restrict their use to high-density designs where spatial savings justify the financial premium.