Meaning
Ratio of the imaginary part of the complex permittivity to its real part measures the dissipation of electromagnetic energy into heat within a dielectric material. This material parameter, referred to as the loss tangent Df, determines the attenuation rate of high frequency signals as they propagate along a printed circuit board trace. Low loss substrates exhibit a small value for this parameter, which limits the energy lost to the surrounding resin.
It applies across all frequency bands and acts as a fundamental constraint in high speed design.
Dielectric Absorption
Alternating electromagnetic fields polarize the molecules of the dielectric laminate millions of times per second. This molecular movement generates friction, which converts electrical signal energy into heat in direct proportion to the loss tangent Df of the material. At high frequencies, this dielectric loss dominates over conductor resistive loss.
High speed transceivers are therefore limited by the material absorption of the board.
Thermal Dissipation
Signal power converted to heat must be dissipated by the system enclosure to prevent thermal damage. A high loss tangent Df can lead to localized heating in high power or high frequency transmission lines. This localized heat alters the dielectric properties and can cause mechanical stress in the board layers.
System designers must account for this thermal load during the initial thermal budget calculation.
Substrate Evaluation
Material qualification laboratories measure dielectric losses using split post dielectric resonators. This test determines the material characteristics under controlled environmental conditions.