Meaning
Coefficient of thermal expansion measured in the direction perpendicular to the primary plane of a material or laminate. This property describes how much a substance expands or contracts along its thickness as temperatures fluctuate. In printed circuit boards and composite enclosures, orthogonal cte is typically much higher than the in-plane values because the reinforcing fibers only constrain expansion in the horizontal and vertical directions.
The measurement is necessary for determining the reliability of through-hole vias and vertical interconnects in multi-layer assemblies.
Vertical Stress
Mismatches between the expansion of copper plating and the surrounding dielectric material create extreme tension during thermal cycling. Because orthogonal cte is often five to ten times greater than the in-plane expansion, the copper barrel of a via can be pulled until it cracks or separates from the internal pads. Engineers select materials with lower z-axis expansion to mitigate this risk in high-reliability applications.
A material with a glass transition temperature higher than the operating range helps maintain a stable expansion rate.
Material Selection
Choice of resin and the ratio of filler particles determine the magnitude of this expansion. High-frequency laminates used in antenna design often incorporate ceramic fillers to reduce the expansion coefficient in the thickness direction. This modification ensures that the distance between ground planes remains stable, which is required for maintaining the characteristic impedance of the RF traces.
If the expansion is not controlled, the shift in dielectric thickness can cause a frequency drift in resonant circuits.
Measurement Metric
Standardized testing using thermomechanical analysis provides the data needed for system-level simulations. These results allow designers to predict the failure point of solder joints and vias under extreme environmental conditions.