Meaning
Standardized procedures for measuring the spatial frequency response of a digital imaging system use a sharp, slightly angled transition between dark and light regions. By tilting the edge, the slant edge test samples the transition at many different positions relative to the pixel grid. This technique provides a more accurate measurement than a perfectly vertical or horizontal edge.
It avoids the phase sensitivity of the pixel array.
Edge Analysis
Software calculates the oversampled edge spread function from the captured image. The slant edge test then takes the derivative of this function to find the line spread function. This intermediate result shows how much the system blurs a single line.
A Fourier transform then converts this data into the frequency domain.
Frequency Calculation
The final output is the modulation transfer function curve. Because the slant edge test uses many pixels along the edge, it is less sensitive to random noise than other methods. The angle of the edge is typically between two and eight degrees.
This angle ensures even sampling across the pixels.
Practical Application
Testing laboratories use this method to verify the performance of mobile phone cameras and industrial sensors. Since a single slanted edge can provide both horizontal and vertical resolution data, the slant edge test is efficient for high volume production. Results are compared against the design specification for the lens and sensor combination.
Software automation allows for rapid pass or fail decisions on the production line. It is the standard method defined in ISO 12233.