Meaning
Microscopic interaction between surface peaks defines the physical engagement between two conductive faces. Real asperity contact is the only location where metal-to-metal bridges form to allow electrical conduction. Surface roughness ensures that even polished connectors only touch at these high spots.
These discrete junctions carry the entire current load across the interface.
Force Distribution
Mechanical pressure governs the growth and stability of these conductive bridges. While a housing might imply a square millimeter of contact, asperity contact is often less than one percent of that space. Pressure forces the peaks to yield, which increases the diameter of each spot until the total load is supported.
Expansion of these spots lowers the constriction resistance by providing a wider channel for electrons to move. Stable connections require enough force to maintain these bridges against the stresses of thermal expansion.
Resistance Contribution
Constriction resistance occurs because current must narrow its path to pass through these tiny junctions. Total resistance at the interface is inversely proportional to the number of these bridges. High current densities at an individual asperity contact site can lead to localized heating or even micro-welding.
Contact Wear
Sliding motion during the mating of a connector reshapes the surface topology. Fresh asperity contact sites are created as older ones are sheared off by friction. This mechanism cleans the surface but also generates metallic debris over time.